Technical support: 1-855-IT-UPVEL (488-7835)

M-F 10AM-7PM excluding public holidays

24-Port 10/100/1000M PoE + 2 Gigabit SFP/RJ45 Combo Ports Layer 2+ Full Managed Switch

UPM-7242CP 24-Port 10/100/1000M PoE + 2 Gigabit SFP/RJ45 Combo Ports Layer 2+ Full Managed Switch

24-Port 10/100/1000M PoE + 2 Gigabit SFP/RJ45 Combo Ports Layer 2+ Full Managed Switch

UPM-7242CP

  • 24-port 10/100/1000M PoE + 2 Gigabit SFP/RJ45 Copper Combo Ports
  • IEEE 802.3at/af PoE, up to 30W per port
  • Layer 2+ Full Managed Software Features with MSTP, LACP, LLDP, sFlow, 802.1X, RADIUS, TACAS+, and ACL
  • DHCP Server/Relay/Snooping
  • Voice VLAN for VoIP devices
  • PD Alive Check & PoE Scheduling
  • Virtual Stacking
  • Automatically adjust Fan speed function

Introduction

UPM-7242CP is 24-port 10/100/1000M PoE + 2 Gigabit SFP/RJ45 Copper Combo Ports L2+ Full Managed Switch that is designed for small or medium network environment to strengthen its network connection. The 24 PoE ports support IEEE 802.3at/af PoE technology, up to 30W per port and maximum 100m transmission distance. The switch equipped with AC to DC power module to support 250W/460W power budget for PoE power. The added 2 SFP/RJ45 combo ports support 100M and Gigabit Fiber transceiver for long distance transmission. The switch also supports Layer 2+ full management software features. These features are powerful to provide PoE Control, Network Control, Management, Monitor and Security features’ requests. It is a superb choice to boost your network with better performance, efficiency and high PoE power consumption.

IEEE 802.3at/af Power over Ethernet (PoE) ports

This product can convert standard 100~240V/AC power into low-voltage DC that runs over existing LAN cable to power up IEEE 802.3at/af compliant network accessories. It also features PoE awareness to verify whether the network device receive power is IEEE 802.3at/af compliant, or only the data will be sent through LAN cable. By adding the switch to the existing networking, installing networking products such as Access Points and IP cameras can be easily managed and set up.

2 Gigabit RJ45 Copper/SFP Combo Ports

UPM-7242CP supports 2 Gigabit Copper/SFP Combo Ports to uplink to servers, storage, or other switching devices for long loop reach applications.

Full Layer 2+ Management Features

The switch includes full Layer 2+ Management features. The software set includes up to 4K 802.1Q VLAN and advanced Protocol VLAN, Private VLAN, MVR…advanced VLAN features. There are 8 physical queues Quality of Service, IPv4/v6 Multicast filtering, Rapid Spanning Tree protocol to avoid network loop, Multiple Spanning Tree Protocol to integrate VLAN and Spanning Tree, LACP, LLDP; sFlow, port mirroring, cable diagnostic and advanced Network Security features. It also provides Console CLI for out of band management and SNMP, Web GUI for in band Management.

Advanced Security

The switch supports advanced security features. For switch management, there are secured HTTPS and SSH, the login password, configuration packets are secured. The port binding allows to bind specific MAC address to the port, only the MAC has the privilege to access the network. The 802.1X port based Access Control, every user should be authorized first when they want to access the network. AAA is the short of the Authentication, Authorization and Accounting with RADIUS, TACAS+ server. Layer 2+ Access Control List allows user to define the access privilege based on IP, MAC, Port number…etc.

PD Alive Check

When this function is enabled, UPM-7242CP will detect a network PoE powered device (for example, an IP CAM) with a set of IP address periodically. If the switch doesn’t get any replies from the network PoE powered device, UPM-7242CP will do a power cycle (PoE power OFF, and PoE power ON) to the port that connects the network PoE powered device, allowing that device to reboot. You can set the frequency of detecting, number of times of detecting, and the time period to perform power cycle when there’s no reply via the switch’s PoE configuration web page.

Virtual Stacking

UPM-7242CP supports Virtual Stacking function, which allows multiple eten switches of different models to stack virtually and managed as a single one switch.

  • 24-port 10/100/1000M PoE + 2 Gigabit SFP/RJ45 Copper Combo Ports
  • IEEE 802.3at/af PoE, up to 30W per port
  • Layer 2+ Full Managed Software Features with MSTP, LACP, LLDP, sFlow, 802.1X, RADIUS, TACAS+, and ACL
  • DHCP Server/Relay/Snooping
  • Voice VLAN for VoIP devices
  • PD Alive Check & PoE Scheduling
  • Virtual Stacking
  • Automatically adjust Fan speed function
Interface
10/100/1000M RJ45 Ports 24
100/1000Base-X SFP and 1000M RJ45 Combo Port 2
Console Port for CLI Management 1
System Performance
Packet Buffer 4Mbits
RAM Memory 128MB
Flash Memory 16MB
MAC Address Table Size 8K
Switching Capacity 52Gbps
Forwarding Rate (64-byte) 38.688Mpps
PoE Features
EEE 802.3 af/at IEEE 802.3 af/at
Number of PSE Ports 24
PoE Mode Mode A
Max. Power Budget 250W/460W
External/Internal Power Internal Power
Power Feeding Detecting Capability on PD
PD Alive Check *
PoE Scheduling
PD Classification
Power Management (per-port)

Enable/Disable PoE Per Port

Overloading Protection

Power Level Setting Per Port

Overloading Protection

L2 Features
Auto-negotiation
Auto MDI/MDIX
Flow Control (duplex)

802.3x (Full)

Back-Pressure (Half)

Spanning Tree

IEEE 802.1D (STP)

IEEE 802.1w (RSTP)

IEEE 802.1s (MSTP)

VLAN

VLAN Group 4K

Tagged Based

Port-based

Q-in-Q

Voice VLAN with OUI

Link Aggregation

IEEE 802.3ad with LACP

Static Trunk

Max. Static Aggregation Group 13

Max. Port per Static Aggregation Group 8

Loop Protection *
Storm Control (Broadcast/Multi-cast/Un-known Unicast) *
Jumbo Frame Support 9.6KB
IGMP Snooping
IGMP Snooping v1/v2/v3 Supports 1024 IGMP groups
IPv6 MLD Snooping Supports 1024 MLD groups
MLD Static Multicast Addresses Supports 1024 static multicast addresses
Querier, Immediate Leave *
QoS Features
CoS

IEEE 802.1p

IP ToS precedence, IP DSCP

Number of priority queue 8 queues/port
Rate Limiting

Ingress 1KBps/1pps

Egress 1KBps/1pps

DiffServ (RFC2474 Remarking) *
Scheduling (WRR, Strict, Hybrid) *
Security
Security

Management System User Name/Password Protection

User Privilege Set user privilege up to 15 Level

Port Security (MAC-based)

IEEE 802.1x Port-based Access Control

ACL (L2/L3/L4)

IP Source Guard

RADIUS (Authentication, Authorization, Accounting)

TACACS+

HTTP & SSL (Secure Web)

SSH v2.0 (Secured Telnet Session)

MAC/IP Filter

Management
Management

Command Line Interface (CLI)

Web Based Management

Telnet

Access Management Filtering

Firmware Upgrade via HTTP

Dual Firmware Images

Configuration Download/Upload

SNMP (v1/v2c/v3)

RMON (1,2,3,&9 groups)

DHCP (Client/Relay/Option82/Snooping/Server)

System Event/Error Log

TFTP (Trivial File Transfer Protocol)

NTP/LLDP

Cable Diagnostics

IPv6 Configuration

Port Mirroring

Virtual Stacking

Physical Characteristics
Dimension (H*W*D) 44*440*331 mm
LED Power, PoE, Link/Act, SFP
Weight 4.8 KG
Power Requirement
Power Input 100~240VAC, Internal Power Supply
Max. Power Consumption 30W
Environment Limits
Operating Temperature 0~45°C
Storage Temperature -20~80°C
Operating Humidity 5~90% (non-condensing)
Mounting Rack Mount
Certification VCCI, CE, FCC Class A
Standard
Standard

IEEE 802.3 – 10BaseT

IEEE 802.3u - 100BaseTX

IEEE 802.3ab - 1000BaseT

IEEE 802.3z 1000BaseSX/LX

IEEE 802.3af Power over Ethernet (PoE)

IEEE 802.3at Power over Ethernet (PoE+)

IEEE 802.3az - Energy Efficient Ethernet (EEE)

IEEE 802.3x - Flow Control

IEEE 802.1Q - VLAN

IEEE802.1v - Protocol VLAN

IEEE 802.1p - Class of Service

IEEE 802.1D - Spanning Tree

IEEE 802.1w - Rapid Spanning Tree

IEEE 802.1s - Multiple Spanning Tree

IEEE 802.3ad - Link Aggregation Control Protocol (LACP)

IEEE 802.1AB - LLDP (Link Layer Discovery Protocol)

IEEE 802.1X - Access Control

Products | Where to buy | Support | Press | Company

© 2012, UPVEL. All Rights Reserved